工艺：参考工艺参数

焊接时遵循以下原则

①板材越厚，焊丝越粗，功率越大，送丝速度越慢

②功率越低，焊接面越白，功率越大，焊缝从彩色变黑色，此时单面成形。

③焊丝的粗细选择应不大于板厚偏向于板厚，焊丝影响焊缝的饱满程度

④焊丝越细，扫描宽度越低

Follow the following principles when welding

① The thicker the plate, the thicker the welding wire, the greater the power, the slower the wire feed speed

② The lower the power, the whiter the welding surface, the greater the power, the weld from color to black, at this time, one side forming.

③The thickness of the welding wire should not be greater than the thickness of the plate to the thickness of the plate, and the welding wire affects the fullness of the weld

④ The thinner the welding wire, the lower the scanning width

受不同品牌激光器影响，以下工艺使用下列激光器打样测试，仅供参考，使用时需要适当微调

①热刺/创鑫/杰普特

②氩气

Affected by different brands of lasers, the following process uses the following laser proofing test, for reference only, and requires appropriate fine-tuning when used

① Tottenham/Chuang Xin/Jept

②argon

一.碳钢/镀锌板

注：受镀锌板锌层影响，镀锌板功率可适当调低

铝材工艺参照不锈钢工艺，功率上调20%-30%即可，另外在焦点上也有差异，需要手动调整

aluminum

The aluminum process refers to the stainless steel process, the power can be increased by 20%-30%, and there are also differences in focus, which need to be manually adjusted